Hitomi Yamaguchi Greenslet, Dr. Eng., FSME, is an associate professor in the Department of Mechanical and
Aerospace Engineering at the University of Florida, Gainesville. Previously, she served as associate professor at Utsunomiya University and research associate at the University of Tokyo (both in Japan) and as
research engineer at Extrude Hone Corp. Greenslet has also served as a researcher abroad (sponsored by Japan Ministry of Education, Culture, Sports, Science and Technology) at NASA Glenn Research Center. Her current research and teaching interests include multiscale manufacturing processes, especially magnetic field-assisted finishing (MAF) processes, which are precision machining processes that utilize magnetic
fields. Greenslet’s work with MAF has been published in more than 60 refereed journal papers and in more than 200 proceedings at both domestic and international conferences. She has received several awards,
including being elected to the 2016 SME College of Fellows, the Best Paper Award at the 2006 International Conference on Manufacturing Science and Engineering (sponsored by ASME) and the SME John T. Parsons Outstanding Young Manufacturing Engineer Award in 2000. Greenslet is an associate member of CIRP (The International Academy for Production Engineering). SME Member Since 1997
Albert J. Shih, PhD, FSME, is professor of mechanical engineering, biomedical engineering and integrative systems plus design at the University of Michigan, Ann Arbor. In 2017, he is serving in the Advanced Manufacturing National Program Office as the ASME Swanson Fellow. After Shih received his doctorate from Purdue University in 1991, he worked at Cummins Inc. in manufacturing for seven years. From 1998 to 2002, Shih was in mechanical and aerospace engineering at NC State University. He joined the faculty of the University of Michigan in 2003. His research and education interests are in manufacturing, particularly in 3D printing of custom orthosis and prosthesis; soft, flexible assistive devices and robotics; clinical simulators and tissue-mimicking materials; drilling and grinding for industrial and medical applications; and novel medical devices. In manufacturing education, Shih has jointly developed courses and 3D-printing lab with the Washtenaw Community College and promotes the video-enhanced manufacturing pedagogy. He joined the 2009 Class of SME Fellows and is also fellow of ASME. SME Member Since 2002
Lihui Wang, PhD, FSME, PE, is a chair professor of sustainable manufacturing at KTH (Royal Institute of Technology), Sweden. His research interests are focused on adaptive process planning, Web-based real-time monitoring and remote control, and human-robot collaborations toward better sustainability. A fellow of SME, Wang is actively engaged in various NAMRI/SME activities. In addition, he is the editor-in-chief of the "International Journal of Manufacturing Research," editor of "Robotics and Computer-Integrated Manufacturing," editor (Northern Europe) of "Journal of Intelligent Manufacturing" and associate editor of the "Journal of Manufacturing Systems." Wang is also a registered professional engineer in Canada. His accomplishments have won him 12 international and institutional awards. SME Member Since 1999
Scientific Committee Chair
Livan Fratini, PhD, is a professor in the Department of Chemical, Management, Computer Systems, Mechanical Engineering at University of Palermo, Italy.
Fratini's major research areas include process engineering of metalforming operations, CAE of sheet metalforming processes and CAE of solid bonding processes. He is fellow of CIRP (The International Academy
for Production Engineering), a member of the board of directors for ESAFORM (European Scientific Association for Material Forming) and vice president of AITEM (Italian Association of Mechanical Technology).
Fratini has received CIRP F.W. Taylor Medal Award in 2007. He is a co-author of approximately 250 publications. SME Member Since 2014
Scientific Committee Chair-Elect
Ihab Ragai, PhD, PE, is an assistant professor of engineering at the Pennsylvania State University, Erie. His research interests include electrically assisted manufacturing, cloud manufacturing, design, simulation of manufacturing processes and materials constitutive modelling. For over 20 years, Ragai has held several positions in industry as design engineer, manufacturing engineer, senior project engineer and project manager. Ragai worked on several projects with ABB Germany, McDonnell Douglas Aerospace USA, Pratt & Whitney Canada and the Canadian Institute of Aerospace Research. Prior to joining academia in 2013, he was a senior engineering manager of technical analysis and design at Hitachi Truck in Canada, overseeing projects related to product and process optimization, truck dynamics and fatigue analysis, structural and drive system components design, and manufacturing processes. Ragai received his doctorate in mechanical engineering from McGill University (Canada) in 2006, master's degree in mechanical design from the American University in Cairo in collaboration with the University of Missouri, Columbia in 1999 and bachelor's degree in manufacturing from Benha Higher Institute of Technology in collaboration with the Technical University of Munich (Germany) in 1994. He served as the technical program chair of the 2014 International Manufacturing Science and Engineering Conference and is currently serving as an associate editor for the Inderscience’s "International Journal of Manufacturing Research." Ragai is a registered professional engineer in Canada and is a recipient of several national and international awards. SME Member Since 1998
Bryan G. Dods, FSME, recently joined the United Technologies Research Center as executive director of its Additive Manufacturing Center of Excellence. Previously, he was CEO of the Institute for Advanced Composites Manufacturing Innovation, managed by Collaborative Composite Solutions Corp. Dods joined IACMI from GE Power as a former chief engineer of manufacturing where he was responsible for overall product manufacturability, manufacturing technology, strategic planning and the focal point for the advanced manufacturing initiative and as the prior executive of manufacturing, engineering and technology at GE Power & Water where he initiated model-based enterprise and smart manufacturing implementations as well as established GE Power’s Advanced Manufacturing Works technology facility. Dods brings industry composite leadership having guided GE’s Wind Turbine Advanced Manufacturing team as blades grew from 34 meters to over 50 meters. He previously worked with Boeing as senior manager of assembly technologies leading composite automated assembly efforts for aircraft such as the 787 and F/A-18. Dods holds a bachelor’s degree in metallurgy, mechanics and materials science from Michigan State University, a master’s degree in materials engineering from Washington University in St. Louis, an MBA from Washington University in St. Louis, and most recently, a bachelor’s degree in mathematics from Indiana University East. He was elected to the 2017 SME College of Fellows and is the recipient of the 2013 M. Eugene Merchant Manufacturing Medal of ASME/SME for influence and responsibility improving the productivity and efficiency of manufacturing operations. SME Member Since 2010
Second Past President
Dean L. Bartles, PhD, FSME, is the 2016-17 president of the North American Manufacturing Research Institution of SME (NAMRI/SME) and the 2016 SME president. He currently holds the position of director of the John Olson Advanced Manufacturing Center at the University of New Hampshire. Bartles served as the founding executive director for the Digital Manufacturing & Design Innovation Institute in Chicago and the chief manufacturing officer of UI LABS. Prior to these recent assignments, he served as a vice president at General Dynamics Corp. where his career spanned over 30 years and included profit and loss responsibility for three manufacturing plants as well as managing the establishment of two manufacturing operations overseas. Bartles has more than 39 years of management experience, which has included positions with Fairchild Republic Co., General Defense Corp., Olin Ordnance, Primex Technologies, General Dynamics and UI LABS. He was elected an SME fellow in 2012. Bartles also serves on the Industry Advisory Board of ASME, where he became a fellow in 2012, and also currently serves as chairman emeritus of the board of directors of the National Center for Defense Manufacturing and Machining and chairman emeritus of the board of directors of the Smart Manufacturing Leadership Coalition. Additional boards Bartles serves are the MT Connect Institute, the Board of
Governors of the Manufacturing Leadership Council, the Louisiana Center for Manufacturing Sciences and Industry Advisory Boards at Penn State University, Iowa State University, Indiana State University, Pittsburgh
State University and East Carolina University. He previously served on the board of directors of the National Center for Manufacturing Sciences, the Manufacturing Enterprise Solutions Association, the
Forging Defense Manufacturing Consortium, the American League of Export Security Assistance, the Manufacturing Division of the National Defense Industrial Association, the Department of Commerce’s Manufacturing Council and the Defense Industry Offsets Association. Additionally, Bartles was part of President Obama’s Economic Recovery Advisory Boards’ Education and Training Subcommittee, the U.S. State Department’s Defense Trade Advisory Group and the Army Research and Development Advisory Committee. He graduated from Shepherd College with a bachelor's degree in business administration, holds an MBA from Shippensburg University and a master’s degree in international business from Tampa College. Bartles has also earned a doctorate in business administration from Nova Southeastern University and a doctorate in technology management with a concentration in advanced manufacturing systems from Indiana State University. SME Member Since 2002
Kristen Bloschock, PhD, is the advanced materials lead for advanced manufacturing within Corporate Engineering, Technology, and Operations at Lockheed Martin Corp. (Bethesda, Maryland). In this role, she manages the corporation’s membership to the materials-focused National Network for Manufacturing Innovation institutes, as well as collaborations across the enterprise to accelerate manufacturing innovation. Prior to joining Lockheed Martin, Bloschock served as a systems engineering and technical assistance contractor, providing technical support to DARPA. Areas of research included micro and nanoelectromechanical systems (MEMS and NEMS), thermal management, nonlinear dynamics, quantum mechanical phenomena, micro and nanofabrication, and the physics of nanomaterials and devices. In addition to her work at Lockheed Martin, Bloschock serves on the board of directors of the Institute for Advanced Composites Manufacturing Innovation and the advisory board for the Industrial Leadership in Physics PhD Program at Georgetown University. She received a bachelor's degree in physics from the University of Notre Dame, and a master’s degree and doctorate in physics from Georgetown University. SME Member Since 2016
Laine Mears, PhD, FSME, CMfgE, PE, is a professor and founding faculty member in the Automotive Engineering Department at Clemson University, teaching and carrying out projects at the Clemson University International Center for Automotive Research. He teaches modeling and analysis of automotive manufacturing processes, quality systems and quality tools, and performs research in manufacturing quality estimation, intelligent machining systems, manufacturing process design and control, and manufacturing equipment diagnostics. Mears has published over 100 peer-reviewed articles, was elected to the 2017 SME College of Fellows and is the recipient of the NSF CAREER award, SAE Ralph Teetor Educational Award, the South Carolina Governor’s Young Researcher Award for Excellence in Scientific Research and the IMECHE George Stephenson Gold Medal. He has over 10 years industry experience, holding positions with Hitachi Automotive and SKF Bearings both as manufacturing engineer and engineering manager in a high-volume precision manufacturing environment. Applicable work in industry includes leading quality implementation teams for QS-9000 and ISO-TS-16949 quality systems, power optimization of hard machining processes and startup of a new bulk deformation rolling process. Mears has a bachelor’s degree in mechanical engineering from Virginia Tech and a master’s degree and doctorate in mechanical engineering from Georgia Tech. He is a member of the American Society of Mechanical Engineers and a senior member of the American Society for Quality. Mears is an ASQ-certified quality engineer, BMW lean six sigma black belt and a licensed professional engineer. SME Member Since 2004
Shawn Moylan, PhD, project leader and mechanical engineer in additive manufacturing at the National Institute of Standards and Technology (Gaithersburg, Maryland). SME Member Since 2017
Brian Paul, PhD, professor, Tom and Carmen West faculty scholar of industrial and manufacturing engineering, and co-director, Microproducts Breakthrough Institute (Corvallis, Oregon). SME Member Since 1985
Brigid Mullany, PhD, received her Bachelor of Engineering Degree and Doctorate in Mechanical Engineering from University College Dublin in Ireland. Upon graduation she received a two-year EU Marie Curie postdoctoral research position at Carl Zeiss in Germany. In 2004 she joined the Department of Mechanical Engineering and Engineering Science at the University of North Carolina at Charlotte where she is a Professor working in the area of surface finishing and advanced manufacturing. She received in the SME Kuo K Wang Outstanding Young Manufacturing Engineer Award in 2007, and the NSF CAREER award in 2008. She is active in CIRP, and is the Vice Chair of the Scientific Technical Committee on Surfaces (STC-S). Currently she is an Associate Program Director in the Advanced Manufacturing Program at the National Science Foundation.
Joe Budzinski, MSME, leads a highly talented and innovative team of manufacturing engineers, technicians, and tool makers, who are part of the supply chain product management organization. He and his team are dedicated to supporting instrument new product development across DePuy Synthes’ Global Orthopaedic Franchise (knee, hip, shoulder, spine, & sports medicine) and establishing the end to end supply chain for these new products. As part of this, they are heavily involved in exploring advanced manufacturing research and collaborating with internal J&J teams as well as key universities and corporations on advanced manufacturing feasibility studies. His team has manufacturing capabilities/expertise in conventional machining, TIG and laser welding, hydroforming plastic injection molding, metal injection molding and 3D printing. In addition, he is currently a member of the industrial advisory board for ASME as well as recently become a board member for the North American Manufacturing Research Institute for SME. Over his twenty-three-year career at Johnson & Johnson, Joe has led many teams and projects as well as held various supply chain and manufacturing engineering roles. This included managing three production cells (which manufactured orthopaedic knee, hip, neurological, and trauma implants as well as overseeing MRO inventory management), actively participated in two mergers and two divestitures, the expansion of the Raynham investment casting foundry, setting up our Cork Ireland foundry, establishing in-house metallurgical and ceramic slurry testing labs, supporting the J&J GOLD and R&D LDP programs, as well as key manufacturing initiatives in JIT, Lean manufacturing, Six Sigma, and maintenance excellence. He joined Johnson & Johnson right out of graduate school at the University of Colorado at Boulder (MSME), and did his undergraduate work at the University of Notre Dame (BSME). Joe is also Six Sigma Black Belt and Green Belt certified and trained.